? If the three-in-one water pump wants to achieve silence, it needs to reduce or even eliminate its vibration. There are many factors that cause vibration, so it is often necessary to check one by one. This pump has three functions, it can be used as a filter, it can also surf in the tank, and it can also increase oxygen, but rarely when three functions are on at the same time, it usually only uses one or two.
of the noise of the water pump? 1. Check the pump body: The noise of the water pump may be the problem of the pump body itself. If you want to check it, you can take out its suction cup, and then put it into the cylinder freely to see if there is any sound. If there is any sound, you need to remove the pump core and clean it, and then install it and try again. If not, replace the pump with a new one.
2. Length of water pipe: If the water pipe of the water pump is too long, it will increase the load of the pump, resulting in increased vibration. In this case, it will also produce certain noise. If you want to solve it, just cut the pipe a little.
3, resonance noise: because the water pump is sucked on the cylinder, so when it vibrates, the cylinder will often resonate, so the noise is the largest. If you want to solve the problem, you can remove the suction cup, then hang the pump with a line, put it in the air, or put it directly at the bottom of the cylinder.
