The three-in-one water pump is generally flooded with water. If it is not completely in the water, it will easily cause dry burning, which will increase wear and tear and shorten its service life. This kind of pump is a submersible pump, which has many functions, but usually not all of them are open, because each function will interfere with each other, such as surfing and oxygenation, which will affect the water flow, resulting in a decline in filtration effect.
the three-in-one water pump? 1. Turn off surfing: Although the three-in-one water pump has many functions, it is rarely turned on at the same time. Generally, it does not need to surf and add oxygen when filtering. At this time, it needs to be transformed to turn them off. The method of transformation is very simple. The air inlet is directly connected to the air outlet, so that no air or water is sprayed.
2. Turn off the filtration: If there are other filters, the three-in-one water pump does not need to turn on the filtration, and its own filtration effect is not good. After turning off, it can also enhance the effect of surfing and oxygenation. If you want to close the filter, you can block the filter port to avoid water flow, so that there is no need to put filter material inside.
3. Modify the water pipe: If you want the three-in-one water pump to remove the oil film, you can also modify it slightly. Use two elbows to change its water inlet pipe upward, and at the same time, screw half of the water inlet basket at the mouth of the pipe, and connect a hose to the drain pipe to pump the water into the mineral water bottle filled with filter cotton.
