BetterForFish.com

Do you want to adjust the drift when fishing carp? How to adjust the drift best

Walter White
2021-09-14 01:54:46
Finding the bottom: First install the fishing group without hanging bait. After entering the water, the float will descend first, pull up and float to the flat water position, and then observe the water depth. Trim the lead skin: Trim the lead skin slowly, the weight of the lead skin will be reduced slowly, and the bleaching will rise slowly, and stop when it rises to about 1 mesh. At this time, the mesh adjustment is 1 mesh. Fishing eye: Hang the bait on the hook, re-enter the fishing group, and adjust it to about 2 eyes for trial fishing. If it is inappropriate to try fishing, it can be adjusted to 3 to 5 eyes. When the wind and waves are strong, the number of eyes should be higher.
Do you want to adjust the drift when fishing carp? How to adjust the drift best 1. Do you want to adjust the drift when fishing carp

Carp is one of the important fish species living in fresh water, which has a very good fishing effect. Although fishing carp is not particularly difficult on the whole, it is also necessary to pay attention to many problems and adopt correct methods to make it easier to succeed. Specifically, there are some steps that are of great help to fishing carp, such as drifting. Considering this, if there is time, it is more appropriate to adjust the drift in advance.

From the specific purpose and function, the most important thing when fishing carp is to let the float send out a signal when the carp takes the bait. Anglers can observe these signals in the process of fishing, so as to judge when carp took the bait. In this way, the timing of lifting the pole can be better judged. If carp is large in size and strong in strength, it is necessary to walk the fish before lifting the rod.

Second, how to adjust the drift for fishing carp

As mentioned above, it is not particularly difficult to fish carp, but adjusting the drift in advance is helpful for catching carp. Adjust the drift also need to pay attention to the steps, you can fish according to the following steps:

1, find the bottom: If you don't know the situation in the water, it is recommended to find the bottom first. When looking for the bottom, install the fishing group first. At this time, don't load bait first, and hang the sub-line. Then throw it into the water, and the fish float will sink first under the action of heavy lead. At this time, pull up the drift and pull it to a flat water state. Observe the water depth and have a general understanding of the water conditions.

2. Trim the lead skin: In the previous step, heavy lead was used, while in the second step, the lead skin needs to be trimmed slowly, so that as its weight decreases slowly, the fish float will rise in the water. At this time, observe the number of eyes, and this number of eyes is the adjustment of eyes. When fishing carp, the eye adjustment can be about 1 eye first.

3. Fishing: This is the last aspect to adjust. First, you need to hang the bait on the hook. If it is a double hook, bait can be hung on both hooks. Let the fishing group enter the water again, and then adjust the number of programs, which can be about 2 eyes at first. If no carp takes the bait in the subsequent trial fishing, adjust it to between 3 and 5 mesh. Of course, it is best to have a higher number of eyes when the wind and waves are heavy.

Copyright © 2019-2020 betterforfish.com All right reserved.

Copyright © 2019-2020 betterforfish.com All right reserved.