BetterForFish.com

Fish tank how to prevent the production of scale, how to clean up the scale

Gustavo 'Gus' Fring
2021-07-06 20:20:08
Choose a good water source: Choose a natural water source is not easy to have scale, such as river water or clean water, tap water is more likely to have scale. Heat properly: heat the water, when heated, these ions will precipitate to the bottom, so that the hardness of the water is reduced, so it is not easy to produce scale. Soft water resin: Soft water resin can reduce the hardness of water, the impact is relatively small, will not make the water quality fluctuate greatly, so it is also relatively safe.
Fish tank how to prevent the production of scale, how to clean up the scale

One, fish tank how to prevent the generation of

furring 1, choose good water source: Want to prevent furring to produce, want to choose good water source above all. If the hardness of the water is too high and the water contains a lot of impurities, it will easily produce scale. Be aimed at this kind of circumstance, can change water source, general and natural river water or well water won't have furring to produce, and tap water has furring more easily.

2. Proper heating: If the hardness of the water is high, causing scale in the fish tank, it is not without a solution. The water can be heated first, when heated, these ions will precipitate to the bottom, so that the hardness of the water is reduced, so it is not easy to produce scale, but it may affect the dissolved oxygen of the water.

3. Soft water resin: In addition to heating, the soft water resin can also be used to complete the method of soft water, and relatively speaking, it has less impact on the water body, and will not make the water quality fluctuate greatly, so it is also safer. It should be noted that the soft water resin generally has a life, and it should be replaced after reaching its service life.

2. How to clean up

the scale in the fish tank? Generally, the scale should be cleaned up manually. You can also raise some tool fish, but most of them only eat algae, and the possibility of eating scale is not great. For manual cleaning, you need to fish out the fish first, then drain the water inside, stick toothpaste on the paper towel, and then smear the location of the scale, you can wipe it off. In addition, you can also use citric acid to mix with water, wipe the scale, and clean it up by acid-base neutralization.

Copyright © 2019-2020 betterforfish.com All right reserved.

Copyright © 2019-2020 betterforfish.com All right reserved.