The noise of the fish tank oxygen pump is too loud, mainly caused by vibration, if it is placed on the cabinet, this situation will be more obvious, if you want to reduce the vibration, you can pad a soft pad under the oxygen pump, this can play a shock absorption effect, the noise situation can also be alleviated.
In addition to placing a cushion, placing the oxygen pump in the air can also reduce the impact of vibration. If you have the conditions, you can hang it up, but it's better not to hang it against the wall, otherwise the noise may increase instead of decreasing. In addition, make sure that the hanging is firm, in case of falling down, it may be broken.
Noise reduction can not only be achieved by shock absorption, but also by isolating the aerator pump. A sealed foam box or carton can be prepared and placed inside. It should be noted that although this method reduces the noise, it may cause extreme damage because it can not dissipate heat, so it is only suitable for a period of time, if it is open all day, it is not suitable for this way.
When checking the noise of the oxygen pump, be sure to use the upper air pipe and bubble stone, so as to reduce the noise as much as possible. It should be noted that if the bubble stone is blocked, it will also lead to increased noise, at this time need to do some cleaning work for the bubble stone, or simply replace it.
